FAQ's - Magnetic Camping Lights - 4 PackUpdated 7 hours ago

You can purchase the Magnetic LED Camping Lights 4-Pack directly online through our website, call our sales team on (07) 3123 4715, or find a KickAss Store near you.

The KickAss Magnetic LED Camping Lights kit includes:

• 4 x Magnetic Camping Lights
• 1 x 0.8-metre 4-in-1 USB-C Charging Cable
• 1 x KickAss Carry Bag

You can view and download the official user manual here: KATORCHMAG-4PK

Each light in the 4-pack produces a maximum of 550 lumens. The lights have two primary modes, each with adjustable brightness:

• Spotlight Mode: A focused beam for precise tasks. It has a Low and High setting.
• Floodlight Mode: A wide-angle beam for illuminating a larger area.

You can also use the stepless dimming function in any mode to fine-tune the brightness to your exact preference.

The lights are designed for maximum versatility with multiple mounting options:

• Magnetic Base: The strong magnetic base attaches securely to any flat ferrous metal surface, like a vehicle panel, awning frame, or toolbox.
• Hanging Hooks: Two built-in hooks fold out from the base, allowing you to hang the light from tent poles, guy ropes, or tree branches.
• Tripod Mount: A standard tripod thread is integrated into the base for mounting on a camera tripod or other compatible stands for elevated lighting.
• 360° Swivel: The light housing can be rotated a full 360° to aim the beam precisely where it's needed.

The lights have a IPX4 weather-resistant rating. This means they are protected against splashing water and light rain from any direction, making them suitable for typical outdoor camping conditions. However, they are not waterproof and should not be submerged in water. Always ensure the USB-C port cover is firmly sealed before use in wet environments.

1. Lift the protective rubber cover to access the USB-C port on each light.
2. Using the included 1-to-4 split cable, connect one USB-C end to each light.
3. Connect the single USB-A end of the cable to a suitable power source (e.g., power bank, 12V USB charger, wall adapter).
4. The battery indicator on each light will glow red to confirm charging has started.
5. When a light is fully charged, its indicator will turn green. Unplug the cable once all lights are green.

Note: You can use the lights while they are charging.

Press the power button to turn the light on and cycle through the modes. To switch modes, you must press the button again within 5 seconds.

• 1st Press: Turns on Spotlight (Low mode).
• 2nd Press: Switches Spotlight to High mode.
• 3rd Press: Switches to Floodlight mode.
• 4th Press: Turns the light OFF.

Important: If the light remains in any mode for more than 5 seconds, the next single press of the power button will turn the unit OFF instead of cycling to the next mode.

While the light is ON in any mode (Spotlight or Floodlight), press and hold the power button.

• The light will smoothly dim and then brighten.
• It will flash briefly when it reaches the minimum or maximum brightness level.
• Release the power button when you have reached your desired brightness.

This is a designed feature for convenience. If the light has been on in a single mode for more than 5 seconds, the system assumes your next button press is to turn it off. To cycle through the different modes, you must press the power button multiple times within 5 seconds of the first press.

• Connection: Ensure the USB-C cable is securely plugged into both the light and the power source. Try a different one of the four outputs on the charging cable.
• Power Source: Confirm your USB power source (wall adapter, power bank, etc.) is working correctly by testing it with another device.
• Cable Condition: Inspect the charging cable for any visible damage, such as frayed wires. If you suspect the cable is faulty, try charging the light with a different standard USB-C cable.

Always turn the lights off before cleaning. Wipe the exterior with a soft, slightly damp cloth. Do not use abrasive cleaners, harsh chemicals, or solvents, as they can damage the housing. Never submerge the lights in water. For long-term storage, charge the batteries to approximately 50% every 3-6 months to maintain battery health.