You can purchase the Camping Table Light directly online through our website, call our sales team on (07) 3123 4715, or find a KickAss Store near you.

Each KickAss Rechargeable Camping Table Light kit includes:

• 1 x Camping Table Light with integrated Tripod
• 1 x 2m USB-A to USB-C Charging Cable
• 1 x KickAss Carry Bag

You can view and download the official user manual here: KACAMPLTBLE

The light features two distinct light sources with multiple modes:

• Main Body Lantern (White): Delivers up to 1000 lumens for broad area lighting.
• Top Head Light (White): A 500-lumen overhead light for more focused illumination.
• Top Head Light (Amber): A 500-lumen warm amber light, ideal for reducing insect attraction.

All modes feature stepless dimming, allowing you to fine-tune the brightness by pressing and holding the power button.

The integrated telescopic tripod extends smoothly from a compact tabletop unit up to a maximum height of 1 metre. This allows you to elevate the light source for wider, more even coverage across your campsite.

The approximate runtimes for each light mode are:

• Main Body (White): 2 hours at maximum brightness.
• Top Head (White): 9 hours at maximum brightness.
• Top Head (Amber): 9 hours at maximum brightness.

Runtimes will be longer when using the stepless dimming feature at lower brightness levels.

Yes. The Camping Table Light has a built-in power bank with a USB-A output port delivering 5V/1A (5W). This is suitable for charging smartphones, head torches, and other small USB-powered devices.

1. Secure the charging port cover to access the USB-C input.
2. Using the provided cable, connect the USB-C end to the light and the USB-A end to a reliable 5V/2A power source (e.g., wall adapter, power bank).
3. The power button will glow solid red to indicate that charging is in progress.
4. When charging is complete, the power button will turn green. Unplug the cable and ensure the port cover is securely closed to maintain IPX4 water resistance.

1. Deploy Legs: Press the 'RELEASE' button on the bottom plate. The four spring-loaded legs will pop open automatically. Place the light on a flat, stable surface.
2. Select Light Source:
   • Press the POWER button once to activate the main body lantern (white).
   • Press the POWER button twice to activate the top head light (white).
3. Change Colour (Top Head Only): When the top head light is on, press the POWER button again to switch between white and warm amber.
4. Adjust Brightness: At any time, press and hold the POWER button to smoothly dim the light to your desired brightness.
5. Turn Off: Press the POWER button again to turn the light off. Note that pressing the button after 5 seconds of inactivity will also turn the light off.

• IPX4: This rating means the light is protected against splashing water from any direction. It can safely be used in light rain, but it is not waterproof and must not be submerged.
• IK07: This is an impact protection rating, indicating the light's enclosure can withstand an impact of 2 joules. It is built to handle typical knocks and bumps associated with camping and outdoor use.

The most common cause is a depleted battery. Please connect the camping table light to a power source using the provided USB-C cable and allow it to fully charge for approximately 6 hours. If the light still does not turn on after a full charge, please contact our support team.

1. Check Indicator: When plugged in, the power button should glow red. If it does not, proceed to the next steps.
2. Secure Connections: Ensure the USB-C cable is firmly plugged into both the light and the power source.
3. Check Power Source: Verify that the wall adapter, power bank, or car charger you are using is functional. Try a different power source if possible.
4. Inspect Cable: Check the charging cable for any visible damage, such as frayed wires or bent connectors. Try a different USB-A to USB-C cable if you suspect the original is faulty.